SNMP/TL1 Configuration Menu
SNMP/TL1 Configuration
Main Menu\System
Management\SNMP/TL1 Configuration\
The Simple Network Management Protocol (SNMP)/TL1 Configuration menu (see
is used to provision contact information, community names, trap hosts, and the traps enabled
option, which provide control to manage SNMP remote access to the system through inband
management. The TL1 Target ID (TID) is also set from the SNMP/TL1 Configuration menu.
TID: TA1248
Unacknowledged Alarms: None
The SNMP/TL1 Configuration menu options are shown in
Table 5-44. SNMP/TL1 Configuration Menu Options
Option
Description
1
Contact Information
2
Community Names
3
Trap Hosts
4
Traps Enabled
5
TL1 Target ID
61179641L4-5B
SNMP/TL1 Configuration
1. Contact Information
2. Community Names
3. Trap Hosts
4. Traps Enabled
5. TL1 Target ID TA1248
Selection :
'?' - System Help Screen
Figure 5-44. SNMP Configuration Menu
Function
This option displays the
Menu"
This option displays the
Menu"
This option displays the
page 5-75.
This option is used to toggle between Yes and No to
enable or disable the traps.
This option is used to set the TID. The TID is required to
use TL1.
Total Access 1248
Yes
Table
5-44.
"SNMP Contact Information
on page 5-72.
"SNMP Community Names
on page 5-73.
"SNMP Trap Hosts Menu"
Menu Descriptions
Figure
5-44)
on
5-71