Table of Contents
Advertisement
5.SCAN FUNCTIONS
7.
[Close]
Quits the scanning operation.
8.
[Pre-Scan]
Pre-scans the original.
9.
[Scan]
Scans the original.
10. Measurement unit
Select [Inch], [mm], or [Pixel] to change the measurement unit.
11.
Opens the advanced scan dialog.
P.121 "Advanced scan dialog"
Advanced scan dialog
You can click the triangle that faces right on the right-hand side of the basic scan dialog box to make scanning
settings. The default settings are underlined.
1.
Resolution
Sets the horizontal and vertical resolution as dots per inch: 150 x 150 dpi, 200 x 200 dpi, 300 x 300 dpi, 400 x 400
dpi, or 600 x 600 dpi.
2.
Original Mode
Sets the original mode to fit the original image such as text only or the mixture of text and photos: Text, Text/
Photo, Gray, or Color.
3.
Original Size
Sets the original document size or the scanning area.
Select the original size from the pull-down list.
The displayed items differ depending on the installed options and destinations.
When [600 x 600 dpi] is selected in [Resolution] and [Color] is selected in [Original Mode], only [A5-R] or [ST-R]
can be selected.
When [400 x 400 dpi] is selected in [Resolution] and [Color] is selected in [Original Mode], paper size larger than
[A4] or [LT] cannot be selected.
1
2
3
4
5
6
7
8
Setting up Scan Options 121
Advertisement
Table of Contents
