Table of Contents
Advertisement
2.COPY FUNCTIONS
Placing originals on the Reversing Automatic Document Feeder
1. Align all the originals.
2. Place them face up and align the side guides to the original length.
The top sheet of the originals will be scanned first.
Do not load more than 50 originals (80 g/m
originals does not exceed 9.5 mm regardless of their size.
Flatten curled paper before loading it on the Reversing Automatic Document Feeder.
When placing long originals (A3, B4, A4-R, LD, LG, COMP, or 8K), open the original holder so that the size of the
original can be detected correctly.
To prevent long originals (A3, B4, A4-R, LD, LG, COMP, or 8K) from sliding out, extend the paper exit stopper
and raise the sub-stopper. When you have finished using the stopper, lift it slightly and slide it back in.
1
To prevent misfeeding, do not leave originals or turn OFF/ON the equipment with originals on the Reversing
Automatic Document Feeder.
34 Basic Copy Procedure
2
, 20 lb. Bond) at once, and make sure the thickness of the stack of
2
Advertisement
Table of Contents
