5.SCAN FUNCTIONS
Scanning from the equipment connected by USB cable
Click
on the basic scan dialog box.
1
2
When the [IO Type] dialog box appears, select [USB].
3
Click [OK].
Using the Easy Set feature
When you have made scan settings, you can save them as an Easy Set file. This allows you to load a specific batch of
settings without changing the scan settings each time.
P.123 "Saving the Easy Set file"
P.123 "Using the Easy Set file"
P.124 "Deleting the Easy Set files"
Saving the Easy Set file
You can save multiple Easy Set files.
Open the advanced scan dialog from within your application.
1
P.118 "How to scan"
Set the scan options as you like.
2
P.120 "Scan options"
Click
next to the Easy Set menu.
3
Enter a file name, select a folder where you save the file, and then click [Save].
4
Using the Easy Set file
Select the pre-defined Easy Set file, or click
1
file.
The following two pre-defined files are available.
Pre-defined File
Picture
Text
When the Open dialog box appears, select the folder, select the target Easy Set file, and then click [Open].
Click [Pre-Scan].
2
next to the Easy Set menu to select your Easy Set
Resolution
150 x 150 dpi
600 x 600 dpi
Original Mode
Text/Photo
Text
Setting up Scan Options 123
Other Scan Options
Default settings