Toshiba e-studio 2822AM User Manual page 134

5.SCAN FUNCTIONS
 Scanner
You can set the following scan functions on [Scanner].
 Current Scanner
Shows the current scanner (TWAIN source/driver). When you click [Select], the dialog box opens so that you can
select any one source from the list.
 The correct TWAIN source has been selected at the installation. In most cases, you do not need to select the
scanner again.
 If one or more TWAIN sources have been installed, be sure to select the correct TWAIN source for the
equipment.
 You can select a TWAIN source also by selecting [Select Scanner] from the [File] menu.
 Show dialog when "Scan" Tool Bar Button is used.
Sets the action to be done when you click the [Acquire] icon on the tool bar or when you select [Insert Scanned
Image] from the shortcut (or context) menu. Select the check box to open the scanner driver. Click to clear the
check box to start scanning immediately without opening the scanner driver.
134 Scanning from e-STUDIO Scan Editor