Table of Contents
Advertisement
5.SCAN FUNCTIONS
Menu Functions
FILE NAME(MAX128)
FILE FORMAT
To make further settings, see the following.
P.149 "Scan Settings"
Press [START].
7
When you store the scans in an Android device, never attempt to disconnect it from the equipment until data
transmission is completed. Disconnecting the Android device during data transmission may corrupt it.
8
If there are more originals, place the next ones.
When you place originals on the Reversing Automatic Document Feeder (RADF), select "SCAN NEXT" using
or
and press [OK]. (Only when "CONTINUE SCAN" is set to "ON")
When you place an original on the original glass, select "SCAN NEXT PAGE" using
CONTINUE SCAN
SCAN NEXT
FINISHED
Repeat step 8 until all the originals have finished being scanned.
If there are no more originals, select "FINISHED" using
9
pressing the [OK].
If originals remain on the Reversing Automatic Document Feeder after pressing [FINISHED] on the CONTINUE
SCAN screen, remove all the originals. Leaving them may cause a paper jam.
148 Scan to Mobile
Settings
-
PDF
TIFF
JPEG
RADF
NEXT ORIGINAL?
SCAN NEXT PAGE
FINISHED
An initial file name can be changed.
P.157 "Character entry"
MULTI
Stores your scan as a PDF file.
Select [MULTI] for saving several
SINGLE
pages as a single file.
Select [SINGLE] for saving several
pages as a separated single file for
each page.
Stores your scan as a TIFF file.
MULTI
Select [MULTI] for saving several
SINGLE
pages as a single file.
Select [SINGLE] for saving several
pages as a separated single file for
each page.
Stores your scan as a JPEG file.
This setting is not available when
"BLACK" is selected in the "COLOR
MODE" function.
Original Glass
or . The originals are stored by
Description
or
and press [OK].
Advertisement
Table of Contents
