Table of Contents
Advertisement
3.
OPERATING FUNCTIONS
3.1
Mode and function of buttons
The layout of the figures is purely indicative and can undergo variations.
"ENTER" key: turn on, off, confirm or interrupt/
exit a function
"ALARM VENT" key: valve open (flashing
LED), valve closed (steady LED)
"ESC" key: exit a function
"CONV." icon: "Conv." cooking mode
"STEAM" icon: "Steam" cooking mode
"COMBI" icon: "Combi" cooking mode
3.2
Control panel operation
The buttons are used to carry out the operations required and to call up or program various functions.
The "ENTER" key (Fig.1/A) can be selected to perform three different functions:
1.
Stop or start a work cycle (and/or consent to access a specific function, e.g., core probe cooking, delayed
start).
2.
Confirm a setting choice.
3.
Pause the current function (press the "ENTER" button to resume the cycle-PAUSE function).
3.3
Description of the operating modes
•
STAND BY mode: display switched off and "ENTER" key lit up
(Fig.1).
•
"HOME PAGE" mode: display switched on, clock shown and
"ENTER" key lit up (Fig.1).
•
"MAIN MENU" MODE: functions shown (RECIPES MENU -
MANUAL COOKING - WASHING - POSTPONEMENT FUNC-
TION - Fig.1/C).
Unless otherwise indicated, the instructions in this
manual are intended for use when the oven is showing
the "HOME PAGE" and with the parameters set by the
manufacturer
After 60 seconds of inactivity in the "MAIN MENU", the oven goes
into "STAND BY" mode.
After 5 seconds of inactivity in the "function selection" or "parameter
selection" mode, the oven saves the function or the value displayed.
The cooking types can be managed by the user in two modes:
•
MANUAL mode: the operator sets the operating parameters
each time (see section 6 "COOKING PARAMETERS").
•
AUTOMATIC mode: the operator sets the operation by selecting
a cooking program (see section 7 "PROGRAMMING").
The "Program" and/ cooking "Recipe" can be called up or repeated as needed. The appliance can save up
to 100 programs. The duration of each program cannot exceed 9 hours of consecutive operation. Inside the
"Program", 5 cooking phases are possible. The "cooking phase", indicated by the word "PHASE", denotes the
cooking characteristics that will be used on the food.
When using a "Recipe" with several processing phases, the appliance ends the cooking cycle at the end of the
last memorized phase (see 7.1. Recipe Index).
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
"TIME" icon: cooking time
"PREV" and "NEXT" icon: to reduce or in-
crease the selected parameter.
"RECIPES" icon: creation or selection of a
recipe
"VENTILATION" icon: fan speed in the cook-
ing chamber
"WASHING" icon: washing mode
"FUNCTION POST." icon: function postponed
mode
B
Fig.1
- 8 -
8
RECIPES
MENU
MANUAL
COOKING
C
WASHING
POSTPONE-
MENT
FUNCTION
A
Advertisement
Table of Contents
