Hobart CMFE Use And Routine Maintenance Manual page 17

Touch screen digital electronic oven
Table of Contents

Advertisement

6.
COOKING PARAMETERS
C - DUAL CORE PROBE (SINGLEPOINT, MULTIPOINT, UNDER VACUUM)
You can cook two types of products in a single cooking cycle. Pro-
ceed as follows:
1. Insert the external core probe into the holder for this purpose
below the oven's control panel.
2. Insert the sharp end of the external core probe inside the product
(placed on a tray inside the cooking chamber) so that the tip is ap-
proximately in the middle of the product.
3 Insert the sharp end of the internal core probe inside the product
(placed on a tray inside the cooking chamber) so that the tip is ap-
proximately in the middle of the product.
4. Close the door of the oven making sure the external core probe
remains connected.
Press the "GO!" button (Fig 3/A) to access the main menu.
Press the "MANUAL COOKING" icon (Fig 3/D) and select a cook-
ing mode (Fig 3/E).
5. Press the "CORE PROBE" icon (Fig 3/F) and the "DOUBLE CORE
PROBE" (Fig 3/H) icon. Press the "CORE PROBE" icon (Fig 3/F)
and use the "MINUS" and "PLUS" icons (Fig 3/G) to set the tempera-
ture for the internal core probe.
You can set the temperature of core probes up to 99° C
6. Press the "CORE PROBE" icon (Fig 3/F) and use the "MINUS"
and "PLUS" icons (Fig 3/G) to set the temperature for the external
core probe. Press the "CORE PROBE" icon (Fig 3/F) to confirm.
Press the "ENTER" key (Fig 3/C) to start cooking.
"PAUSE" function: Press the "ENTER" key (Fig 1/C) to
interrupt the function in progress and press the "ENTER" key again (Fig 1/C) to resume cooking
Press the "ENTER" key (Fig 3/C) and press the "ESC" key (Fig 3/B) several times to return to the Home Page.
7. To change the temperatures of the probes, press the "CORE PROBE" button and repeat the steps described
at points 5 and 6.
Once the minimum set temperature has been reached, the word "END" for the corresponding probe will flash.
Once the maximum set temperature has been reached, the word "END" for the corresponding probe will flash.
The word "MAINTENANCE" will appear and the oven will retain the minimum temperature set.
Press the "ESC" key (Fig 3/B) several times to return to the Home Page.
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
D
Fig.3
Fig.2
- 16 -
16
CONVECTION
E
STEAM
COMBI
VENTILATION
RECIPES
MENU
MANUAL
COOKING
WASHING
INTERNAL DELTA T
EXTERNAL
POSTPONE-
50°
60°
MENT
FUNCTION
FASE1/2
STAGE 1/2
G
B
INTERNAL
C
CORE PROBE
DELTA T
H
EXTERNAL
CORE PROBE
DUAL CORE
PROBE
F

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cmfg

Table of Contents