Table of Contents
Advertisement
6.
COOKING PARAMETERS
6.2
CORE PROBE and DELTA T
The probe detects the internal temperature of a product during
cooking. The cooking time cannot be set or calculated while using
the probe.
The cooking cycle ends when the temperature of the product
reaches the one set for the probe.
There are three ways to manage the oven temperature while using
the core probe mode.
A - CORE PROBE (SINGLEPOINT, MULTIPOINT, VACUUM)
1. Insert the sharp end of the internal core probe inside the product
(placed on the tray inside the cooking chamber) so that the tip is
approximately in the middle of the product.
2. Close the door of the oven, press the "GO!" icon and press the
"MANUAL COOKING" icon (Fig 2/D).
Select a cooking mode (Fig.2/E).
3. Press the "CORE PROBE" icon (Fig 2/F) and the "CORE PROBE
INT or EXT" (Fig 2/H) icon. Press the "CORE PROBE" icon (Fig 2/F)
and use the "MINUS" and "PLUS" icons (Fig 2/G) to set the tempera-
ture for the core probe. Press the "CORE PROBE" icon (Fig 2/F) to
confirm.
You can set the temperature of the core probe up to
99° C
Press the "ENTER" key (Fig 2/C) to start cooking.
"PAUSE" function: Press the "ENTER" key (Fig 1/C) to
interrupt the function in progress and press the "EN-
TER" key again (Fig 1/C) to resume cooking
Press the "ENTER" key (Fig 2/C) and press the "ESC" key (Fig 2/B) several times to return to the Home Page.
It is possible to set the core probe function in all cooking modes and/or recipe phases
B - DELTA T
Repeat the procedure described above in points 1 and 2.
3. Press the "CORE PROBE" icon (Fig 2/F) and the "DELTA T" icon (Fig 2/H). Press the "CORE PROBE" icon
(Fig 2/F) and use the "MINUS" and "PLUS" icons (Fig 2/G) to set the temperature for the probe. Press the
"CORE PROBE" icon (Fig 2/H) and use the "MINUS" and "PLUS" icons (Fig 2/G) to set the permanent tem-
perature difference between the cooking compartment and the core probe (between 20 °C and 120 °C).
Press the "CORE PROBE" icon (Fig 2/H) to confirm.
Press the "ENTER" key (Fig 2/A) to start cooking.
Press the "ENTER" key (Fig 2/C) to stop the function and press the "ESC" key (Fig 2/B) several times to return
to the Home Page.
The core probe function and delta T can be set in all cooking mode and/or recipe phases
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
D
Fig.2
- 15 -
15
CONVECTION
E
STEAM
COMBI
VENTILATION
RECIPES
MENU
MANUAL
COOKING
WASHING
INTERNAL DELTA T
POSTPONE-
50°
60°
MENT
FUNCTION
FASE1/2
STAGE 1/2
G
B
INTERNAL
C
CORE PROBE
DELTA T
H
EXTERNAL
CORE PROBE
DUAL CORE
PROBE
F
Advertisement
Table of Contents
