Rear Assembly - Sony HXCU-TX70 Service Manual

4-12.

Rear Assembly

Preparation
1. Remove the top cover. (Refer
2. Remove the DM-152 board. (Refer to
Procedure
1. Remove the four screws and lift up the A side and then detach the center frame.
Note
When removing the center frame, be careful not to damage the harnesses in the A side.
PSW3 x 6
2. Disconnect the two flexible flat cables from the two connectors (CN011, CN012) on the CN-3662 board.
3. Disconnect the two harnesses from the two connectors (CN014, CN015) on the CN-3662 board.
HXCU-TX70
to"4-2. Top Cover")
"4-5. DM-152 Board")
Center frame
Holes
A side
4-17