Table of Contents
Advertisement
4.
Disconnect the coaxial cable from the connector (CN3901) on the DM-152 board.
Note
Be sure to hold the plug when disconnecting the coaxial cable. Do not pull the cable.
OK
Hold the plug to remove.
Harness
CN101
DM-152 board
Note
When installing the coaxial cable, arrange the cable as shown in the figure.
Hold the plug of the coaxial cable, and connect it perpendicularly to the connector. Push the plug into the connector
while turning it clockwise and counterclockwise several times.
DM shield plate
5.
Remove the screw to detach the DM shield plate.
6.
Remove the five screws to detach the DM-152 board.
HXCU-TX70
NG
Do not attempt to remove
by pulling the cable.
Flexible board
Coaxial cable
CN3901
CN202
CN203
Flexible flat cables
Coaxial cable
CN201
Connecting connector
Hold the plug to connect.
4-7
Hide quick links:
Advertisement
Table of Contents
