Updating The Software Programs; Updating The Main Program - Sony HXCU-TX70 Service Manual

1-4.

Updating the Software Programs

Software programs stored in the ROM on the DPR-361 board can be updating by using a Memory Stick.
For updating the software programs, follow the procedures below.
1-4-1.

Updating the Main Program

Equipment Required
Memory Stick
Check
Check the current main program version with "ROM Version" of status display. (Refer to the Operating Instructions.)
Preparation
Copy the updating program to the Memory Stick in the following steps.
Note
To get the updating program (program files "HSCU300R.rom" and "HSCU300R_BOOT.rom"), contact your local Sony
Sales Office/Service Center.
1. Make the following directory on the Memory Stick.
\MSSONY\PRO\CAMERA\HSCU300R
2. Copy the program files "HSCU300R.rom" and "HSCU300R_BOOT.rom" to the directory made in step 1.
Procedure
1. Turn on the power.
2. Insert the Memory Stick that contains the updating program into the Memory Stick slot on the rear panel.
Memory stick slot
3. Select VERSION UP EXEC from MAIN on the M02: Firmware Update page of the MAINTENANCE menu.
HXCU-TX70
Memory stick
1-5