JUKI LH-3500A Series Instruction Manual page 23

[G type] LH-3578A, 3578A-7, 3588A and 3588A-7
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.

Left-hand
needle thread
Right-hand
needle thread
 - K
 - L
 - M
 - N


Thread the machine head following the order as illustrated in the figure.
Pass the left-hand needle thread, toward the machine head, in the order of ❶ to  . Pass the right-hand
needle thread in the order of A to P.
1. Thread guide (  , M) is able to prevent the needle thread from flapping according to its incli-
nation. If the thread guide is inclined excessively, the needle thread can tangle on thread guide
(  , N). So, carefully adjust the inclination of the thread guide.
2. For the LH-3578A-7 or LH-3588A-7, thread the intermediate thread guide as follows:
･ For polyester spun thread, see Fig. 1. For filament thread, see Fig. 2.
A
❶
K
❷
O
P
Fig. 1
B
❽ - H
– 21 –
Fig. 2
Intermediate
thread guide
14 mm
❹
❸
❺
❻
D
E
F
❼ - G
C