JUKI LH-3500A Series Instruction Manual page 15

(2) Releasing procedure of the grease-up warning for SC-920
❷
❶
WARNING :
To avoid possible personal injuries caused by movement other than that you desired, do not operate
the switches in the procedure other than those required, as described below, to specify the functions.
❷
❶
❷
❶
Keep pressing switch
continuously. If the setting No. ❻ is moved forward (or backward), the previous (or subsequent)
content of the setting is confirmed. Be careful when the content of a setting is changed (when
the up / down switch is touched).
❺
❻
❸ ❹
❺
❻
❸ ❹
❺
❻
❸ ❹
❷ or switch
– 13 –
When the time of grease-up has
come, screen display of LED ❺ on
the left-hand figure becomes "E220".
After performing grease-up, release
the warning following the procedure
below.
1) Turn OFF the power to the unit.
2) Pressing switch
the power to the unit.
3) When the screen is displayed,
keep switch
for three seconds until the buzzer
sounds twice.
4) Set the setting No. ❻ to "118".
When you want to advance the
setting No. ❻ , press switch
❷ to advance the setting No. ❻
When you want to return the set-
ting No. ❻ , press switch
to return the setting No. ❻
❶ , and the setting No. ❻ will advance (return)
❹ , turn ON
❹ held pressed
❶