(3) Setting procedure of the machine head
For the operation panel other than CP-18, refer to the Instruction Manual for the operation panel
to be used for the setting procedure of the machine head.
❷
❶
❷
❶
❷
❶
❺
❻
❸
❹
❺
❻
❸
❹
❺
❻
❸
❹
– 16 –
1) Call function setting No. 95 referring
to "#-6. Setting functions of SC-
920" in the Instruction Manual for the
SC-920.
2) The type of machine head can be
selected by pressing
switch ❹ ).
(
* Refer to "CAUTIONS WHEN SET-
TING UP THE SEWING MACHINE"
or "Machine head list" on the sepa-
rate sheet for the types of machine
heads.
3) After selecting the type of machine
head, by pressing
switch ❷ ), the step proceeds
(
to 96 or 94, and the display automat-
ically changes to the contents of the
setting corresponding with the type
of machine head.
switch ❸
switch ❶