Raymarine ST70 Operating Manual page 18

81281_1.book Page 24 Monday, April 30, 2007 3:31 PM
ST70 instrument - organizing your pages
Changing the layout of a page
5. Select the frame you want to change
< >
Use or or or as appropriate, to move the highlight to
the frame you want to change.
ENTER
Press to go to the data group select menu.
6. Select the required data group
< >
Use or to select the data group that contains the data you
want (Depth shown here).
If you don't know which group you need, select ALL.
ST70 supports a wide range of data. Refer to Card 14 for a full data list.
Note:
ENTER
Press to go to the data select menu.
7. Choose the data you want
< >
Use or to scroll to the data you want, in the style you
want it displayed.
The styles available depend on the data type, but in many
cases, data is available in all the following formats:
• Analog dial.
• Numeric value.
• Graph.
ENTER
Press to select the data and return to the frame
select box.
8. Set up other frames
Repeat step 5 to step 7, to set up the remaining frames on the selected page.
9. Complete page setup
When you have completed the setup for the selected page,
ensure the frame select box is displayed, then use
and/or as appropriate, to move the highlight to the Save &
Exit icon.
ENTER
Press to return to your operational page, with the
changes applied.
CANCEL
Press to return to the Setup options menu, without
applying the changes.
Card
Page 1
Xxx Xxx
0 0
. .
0 0
xx xx
Xxx Xxx
0 0
. .
0 0
xx xx
Depth
i
CANCEL exits without saving.
Press ENTER to select
Page 1 Frame A
Depth
Select the data items group.
i
Press ENTER to select
Page 1 Frame A
Minimum Depth
Select the new data item for this
i
frame.
Press ENTER to select
Page 1
< >
, ,
Xxx Xxx
0 0
. .
0 0
xx xx
Xxx Xxx
0 0
. .
0 0
xx xx
Save and exit.
i
CANCEL exits without saving.
Press ENTER to select
8
continued
Xxx
0
.
0
xx
Xxx
0
.
0
xx
Xxx
0
.
0
xx
Xxx
0
.
0
xx
Save & exit