Raymarine ST70 Operating Manual page 16

81281_1.book Page 22 Monday, April 30, 2007 3:31 PM
ST70 instrument - organizing your pages
Changing the information on a page
5. Select the required data group
< >
Use or to select the data group that contains the data
item that you want (Depth shown here).
If you don't know which group you need, select ALL.
ST70 supports a wide range of data. Refer to Card 14 for a full data list.
Note:
ENTER
Press to go to the data select menu.
6. Choose the data you want
< >
Use or to scroll to:
• The data you want
and
• The style in which you want the data displayed. The styles
available depend on the data type, but in many cases,
data is available in the following formats:
• Analog dial.
• Numeric value.
• Graph.
ENTER
Press to select the data and return to the frame select box.
7. Set up other frames
To set up other frames on this page, repeat the procedure from step 4 to step 6.
8. Complete page setup
When you have completed the setup for the selected page,
ensure the frame select box is displayed, then use
and/or as appropriate, to move the highlight to the Save &
Exit icon.
ENTER
Press to return to your operational page, with the
changes applied.
CANCEL
Press to return to your operational page without
applying the changes.
Card
Page 1 Frame A
Depth
Select the data items group.
i
Press ENTER to select
Page 1 Frame A
Minimum Depth
Select the new data item for this
i
frame.
Press ENTER to select
Page 1
Xxx Xxx
0 0
. .
< >
, , 0 0
xx xx
Xxx Xxx
0 0
. .
0 0
xx xx
Save and exit.
i
CANCEL exits without saving.
Press ENTER to select
7
continued
Xxx
0
.
0
xx
Xxx
0
.
0
xx
Save & exit