Changing The Layout Of A Page - Raymarine ST70 Operating Manual

81281_1.book Page 23 Monday, April 30, 2007 3:31 PM
8
Card
Rebuilding pages
If you want to make changes to the way a page is laid out, use the procedure on this card to
rebuild the page with a different layout and different data.
1. Go to Main Menu
MENU
Press to display the Main Menu then use
.
scroll to Page layout
ENTER
Press to display the Select page menu.
From an operational page you can directly access the frame select
Shortcuts:
box (see step 5 below) for that page, by holding down
2. Select the page you want to change
< >
Use or or to select the page you want to change.
ENTER
Press to display the Setup options menu for the
selected page.
3. Select Rebuild page
< >
Use or to scroll to Rebuild.
ENTER
Press to display the Layout select menu.
4. Select page layout
< >
Use or to highlight the page layout you want. The follow-
ing layouts are available:
When you have selected the layout you want, press
to go to the frame select box.
ST70 instrument - organizing your pages

Changing the layout of a page

< >
or to
ENTER for 1 second.
ENTER
Main Menu
Page Layout
Press ENTER to select.
Page Layout
Page 1 On
Select the page you wish to
i
configure.
Press ENTER to select.
Page 1 Setup
Rebuild
Press ENTER to select
Page Layout
Layout 1
Select the layout you wish to
i
use.
Press ENTER to select.
continued ...