Setting Page Rollover - Raymarine ST70 Operating Manual

81281_1.book Page 15 Monday, April 30, 2007 3:31 PM
6
Card
You can set a rollover value so that operational pages are automatically displayed in
sequence, one after the other.
Use the procedure on this card to:
• Set a rollover period and activate the automatic rollover.
• Switch off the rollover to return to manual page selection.
Setting rollover
1. Select Main Menu
MENU
Press to display the Main Menu then use
scroll to Display Settings
ENTER
Press to display the Display Settings menu.
2. Initial actions
At the Display settings menu, use
Rollover option.
ENTER
Press to show the Rollover setup box.
3. Set rollover value or switch rollover off
If you want the operational pages to cycle round automati-
< >
cally, use or to set the rollover to the number of seconds
you want each operational page to be displayed.
Note: If you are using the rollover feature, it is recommended you switch off pages
you do not require (see Card 5).
If you want to stop the rollover and manually select your
operational pages, use
Returning to normal operation
ENTER
Press to save your setting and return to the Display Settings menu then:
CANCEL
1. Press to select the Main Menu.
CANCEL
2. Press to return to your operational page.
ST70 instrument - organizing your pages
.
< >
or to scroll to the
< >
or to set the rollover to OFF.

Setting page rollover

< >
or to
Main Menu
Display Settings
Press ENTER to select
Display Settings
Automatic page rollover
i
Press ENTER to select
Rollover
< & > adjust rollover period.
i i
CANCEL exits without saving.
Press ENTER to accept
Rollover
4
Secs