Setting The Screen Brightness - Raymarine ST70 Operating Manual

81281_1.book Page 5 Monday, April 30, 2007 3:31 PM
2
Card
Use these instructions to set the screen brightness to the level you want.
Quick Set Up
To quickly change the screen brightness:
1. Press and release
popup.
< >
2. Use or to set the required screen brightness.
ENTER
3. Press to accept the new brightness setting and
return to your operational page.
Alternative method
1. Go to Main Menu
With any operational page displayed, press
the Main Menu, then use
tings option.
ENTER
Press to show the Display Settings menu.
2. Select option
At the Display Settings page, use
Brightness option.
ENTER
Press to display the Brightness setup box.
3. Set level
< >
Use or to set the screen brightness, as required.
ENTER
Press to save the selection and return to the Display
Settings menu.
Returning to normal operation
To return to normal operation from the Display Settings
menu:
CANCEL
1. Press to select the Main Menu.
CANCEL
2. Press again, to return to your operational page.
ST70 instrument - getting started

Setting the screen brightness

to display the brightness adjust
MENU
< >
or to scroll to the Display Set-
< >
or to scroll to the
Depth Speed
9. 7.
0
Brightness
ft
Lat Lon
Press ENTER to accept
o
47 47
N
Main Menu
to display
Display Settings
Press ENTER to select
Display Settings
Brightness
Adjust the display brightness
i
Press ENTER to select
Brightness
< & > adjust brightness.
i
CANCEL exits without saving.
Press ENTER to accept
Heading
o
63
0
kts xx
55%
Time
11:23
24H
55
%