Setting Alarms - Raymarine ST70 Operating Manual

81281_1.book Page 27 Monday, April 30, 2007 3:31 PM
13
Card
For each alarm, you can:
• Disable or enable the alarm.
• Set the level at which the alarm operates.
Setting up alarms
1. Enter alarm setup
MENU
Press to select the Main Menu then use
.
to Alarms
ENTER
Press to display the Alarms select menu.
2. Select the alarm you want to set
< >
Use or to scroll to the alarm you want to select
A complete list of alarms is given on
Note:
ENTER
Press to display the Alarm setup box.
3. Set alarm status
Press to select the upper (alarm status) adjust box.
< >
Use or to select the alarm status:
• Off - disables the alarm.
• On - enables the alarm.
4. Set alarm value
Press to select the lower (alarm value) adjust box.
Use < or > to set the alarm value.
Returning to operating page
To return to your operating page:
ENTER
1. Press to save your settings and return to the Alarms select menu.
CANCEL
2. Press to return to the Main Menu.
CANCEL
3. Press to return to your operational page.
< >
or to scroll
.
Card 12
.
ST70 instrument - alarms

Setting alarms

Main Menu
Alarms
Press ENTER to select
Alarms
Shallow
Adjust the shallow depth alarm.
i
Press ENTER to select
Shallow
On
4
feet
Use < & > to adjust.
i
CANCEL exits without saving.
Press ENTER to accept