3Com CoreBuilder 9000 Quick Start Manual page 17

8 If you plan to use an SNMP manager to manage the CoreBuilder 9000
chassis, use the
set community
manager in the EME Community Table.
The following example creates a community named mgt. This community
provides all access privileges for an SNMP manager with the IP address
122.104.10.9:
CB9000> set community mgt 122.104.10.9 all
9 To display the EME in each management slot and to determine which is
the primary or the secondary EME, enter:
show module all
10 To set a login password for access to the EME, enter:
set login password
For example, to set yourself as having normal administrative access to the
EME, enter the following command and respond to the password
prompt:
CB9000> set login password
Enter current password for user admin: [Enter]
New Password: xxxxxx
Admin password changed.
11 If you want to log in to the Administration Console of a switching
module, a switch fabric module, or an interface module, use the
<slot.subslot>
For example:
CB9000> connect 4.1
Menu Options (CoreBuilder 90000-FF0B00):-------------------
module - Administer module-level functions
ethernet - Administer Ethernet ports
bridge - Administer bridging/VLANs
snmp - Administer SNMP
disconnect - Disconnect and return to Management Console
Type ? for help.
CB9000@slot 4.1 [20-E/FEN-TX-L2] ():
Enterprise Management Engine Quick Start Guide
command to create an entry for the
command.
17
connect