3Com CoreBuilder 9000 Quick Start Manual page 16

16 Enterprise Management Engine Quick Start Guide
Configuring Network Access to the EME
With network access you can manage the CoreBuilder 9000 chassis from
a remote terminal or SNMP manager. See Chapter 6 in the
CoreBuilder 9000 Enterprise Management Engine User Guide for more
information about using the EME for network access.
To configure the EME for network access:
1 Connect a terminal to the RS-232 serial port.
2 Press Enter to display the
3 At the prompt, enter the default login name:
login:
Use all lowercase. When the system prompts you for a password, press
Enter.
For example:
login: admin
Password: [press Enter]
4 Set the IP address for the EME Ethernet port using the
set ip ip_address <ip address> ethernet_port
For example:
CB9000> set ip ip_address 155.104.10.2 ethernet_port
5 Set the IP subnet mask for the EME Ethernet port using the
set ip subnet_mask <subnet mask> ethernet_port
For example:
CB9000> set ip subnet_mask 255.255.0.0 ethernet_port
6 Set the EME Ethernet port IP default gateway using the
set ip default_gateway <default gateway> ethernet_port
command.
For example:
CB9000> set ip default_gateway 155.104.10.7 ethernet_port
7 To verify the IP address and subnet mask, enter:
show ip
prompt.
login:
admin
command.
command.