70
C
4: C
HAPTER
ONFIGURING THE
Reauthentication Period – Sets the time
■
period after which a connected client must
be re-authenticated. (Range: 1-65535
seconds; Default: 3600 seconds)
Quiet Period – Sets the time that a switch
■
port waits after the Max Request Count has
been exceeded before attempting to acquire
a new client. (Range: 1-65535 seconds;
Default: 60 seconds)
Transmit Period – Sets the time period
■
during an authentication session that the
switch waits before re-transmitting an EAP
packet. (Range: 1-65535; Default: 30
seconds)
After you have filled in the parameters, click
Apply to save your changes.
S
WITCH
Figure 61 802.1X Setup Screen
Monitoring
Using the Web interface, you can display
address table information and cable
diagnostics.
The Monitoring menu includes two items:
Address Table
■
Cable Diagnostics
■
Address Table
Use the Address Table Summary screen to
display the Address Table information. You can
query by selecting a port, choosing a VLAN, or
entering in a MAC Address, then click Select.