Spanning Tree - 3Com Baseline 2426-PWR Plus User Manual

Figure 32 Tagged VLAN Configuration
To set up the configuration shown in
do the following:
Create VLAN2 on both Switch 1 and Switch 2.
1
You need not create VLAN1 since it exists by
default.
2
3
4

Spanning Tree

Figure 32,
Configuring VLANs
On Switch 1, set the ports that you want to be
part of VLAN2 to Untagged. Set one port (for
example, port 16) to Tagged.
Click Apply.
On Switch 2, set the ports that you want to be
part of VLAN2 to Untagged. Set one port (for
example, port 8) to Tagged.
Click Apply.
Connect the Tagged port on Switch 1 (in this
example, port 16) to the Tagged port on Switch
2 (in this example, port 8).
Those ports on Switch 1 that are members of
VLAN2 can now communicate with those ports
on Switch 2 that are members of VLAN2.
Spanning tree is a bridge-based system for
providing fault tolerance on networks and can
be used to detect and disable network loops.
The spanning tree ensures that the optimal
49