3Com Baseline 2426-PWR Plus User Manual page 58

58 C 4: C
HAPTER ONFIGURING THE
To create a new link aggregation group:
Enter a link aggregation group ID in the box
1
field.
Select the ports to add to the goup.
2
Click Apply.
3
Modify
Use the Modify tab reassign port members to a
link aggregation group.
Figure 44 Link Aggregation Modify Screen
S
WITCH
To modify a link aggregation group:
Select the aggregation group to modify, then
1
click Select.
Select the ports to add to the goup.
2
Click Apply.
3
Remove
Use the Remove tab delete a link aggregation
group.
Figure 45 Link Aggregation Remove Screen
To remove a link aggregation group:
From the link aggregation group list, select the
1
aggregated group to remove.
Click Remove.
2