3Com Baseline 2426-PWR Plus User Manual page 67

Figure 57 RADIUS Client Detail Screen
Configure
Use the Configure tab to configure the RADIUS
settings. The following parameters are
available:
Max Retries – Sets the number of retries of
■
sending authentication requests.
Timeout – Sets the interval between sending
■
authentication requests.
IP Address – The IP address of the RADIUS
■
server.
UDP port – The RADIUS server UDP port
■
used for authentication messages.
Key – Sets the RADIUS encryption key.
■
After you have filled in the parameters, click
Apply to save your changes.
Figure 58 RADIUS Client Configure Screen
Security 67