Accessing The Interface Without Using Discovery; Dhcp Assigned Ip Address; Manually Assigned (Static) Ip Address - 3Com Baseline 2426-PWR Plus User Manual

30 C 3: C
HAPTER ONNECTING TO THE
Accessing the Interface Without Using
Discovery
The Discovery application works by
automatically detecting the IP address that is
assigned to the Switch, and then using that
address to connect to the Web interface. If you
know the Switch's IP address, you can access
the Web interface without using Discovery.
This section describes how to access the inter-
face directly, without using Discovery.
If you do not configure the Switch's IP address
settings, it will perform auto IP configuration to
assign an IP address to itself. For more informa-
tion, refer to "Automatic IP Configuration" on
page 33.
To determine the IP address that the Switch will
assign to itself during auto IP configuration,
check the sticker on the base of the Switch.
This sticker contains the MAC address and
default IP address of the Switch.
W I
EB NTERFACE

DHCP Assigned IP Address

If you set the IP address mode to DHCP, check
the DHCP server for the IP address that is
assigned to the Switch, and then use that IP
address to access the Web interface.
For example, if the DHCP server assigned the IP
address 192.168.0.123 to the Switch, start
your Web browser, and then type
http://192.168.0.123

Manually Assigned (Static) IP Address

If you assigned a static IP address to the Switch,
you need to use that IP address to access the
Web interface the next time you want to
configure the Switch.
For example, if you assigned the Switch the IP
address 192.168.0.123, start your Web
browser, and then type
.
.
http://192.168.0.123