Document Scanning Position Sensor Pcb - Brother HL-J6000DW Service Manual

9.20 Document Scanning Position Sensor PCB

(1) Turn the Bushing of the Document feed roller 1 in the direction of the arrow 1a to
unlock it.
(2) Remove the Document feed roller 1 from the Lower doc chute ASSY.
1a
Bushing
(3) Keep the Actuator R at the position shown in the figure.
(4) Push the Lock arm in the direction of the arrow 4a and release the Hook. Remove
the Document scanning position sensor PCB from the Lower doc chute ASSY.
(5) Disconnect the Connector from the Document scanning position sensor PCB.
Bushing
2b
2a
Fig. 3-63
Document scanning position sensor PCB
4b
Actuator R
Fig. 3-64
3-70
Lower doc chute ASSY
2c
Connector
5
4a
Hook
Document feed roller 1
Lock arm
Confidential