(12)Remove the Second side CIS unit from the Lower doc chute ASSY.
(13)Remove the CIS spacer from the Second side CIS unit.
CIS spacer
9.22 First Side CIS Unit/First Side CIS Flat Cable
(1) Turn the Document scanner unit upside down.
(2) Remove the four screws (TAPTITE CUP B M2.6x10).
Assembling Note: When tightening the screw (TAPTITE CUP B M2.6x10), tighten
TAPTITE CUP B M2.6x10
1
Document scanner unit
Second side CIS unit
13
them in the order shown in the figure.
2
CIS spacer
12
Lower doc chute ASSY
Fig. 3-72
TAPTITE CUP B M2.6x10
4
Fig. 3-73
3-75
13
3
Confidential