Ink Absorber Box - Brother HL-J6000DW Service Manual

9.44 Ink Absorber Box

(1) < Except 3rd tray model >
Turn the main body upright as shown in the figure.
< 3rd tray model >
When finishing step (2) of
and step (2) of
shown in the figure.
(2) [Model with Lower tray]
Remove the two screws (TAPTITE CUP B M3x10) and remove the Ink absorber
box from the Main body.
[Model without Lower tray]
Remove the four screws (TAPTITE CUP B M3x10) and remove the Ink absorber
box from the Main body.
"9.49. LT Frame ASSY (T2 Paper Pull-in Roller L/R)"
"9.63. 3rd Tray Relay
Fig. 3-142
Fig. 3-143
Main body
Fig. 3-144
3-115
PCB", turn the Lower tray unit upright as
Main body
Ink absorber box
TAPTITE CUP B
M3x10
Ink absorber box
TAPTITE CUP B
M3x10
TAPTITE CUP B
M3x10
Confidential