Paper Feeding At An Angle; Recording Paper Jam - Brother HL-J6000DW Service Manual

4.2.6 Paper feeding at an angle

< User Check >
- Check that recording paper is loaded correctly in the tray.
- Adjust the paper guide to match the recording paper size.
- Check thickness of recording paper is within tolerance of each type.
- Check if too much paper is loaded in the paper tray.
- Clean the paper pull-in roller.
Step
1 Bank ASSY out of place
2 Paper feeding path parts out of place Set the paper feeding path parts into place.
3 Main PCB defective

4.2.7 Recording paper jam

■ Paper jam around the paper tray
< User Check >
- Check that recording paper is loaded correctly in the paper tray.
- Check that the paper tray is inserted all the way to the back end.
- Adjust the paper guide to match the recording paper size.
- Check that the paper smaller than the specified size is not loaded.
- Check thickness of recording paper is within tolerance of each type.
- Check that the number of recording paper loaded in the paper tray is within specified
volume.
- Check that the jam clear cover is securely closed.
- Clean the related rollers.
Step
1 Foreign materials in the
recording paper path
2 Bank ASSY out of place
3 Platen foam drift
4 Jam clear cover
in place
5 CR guide rail not mounted in place
6 Platen ASSY not mounted in place
7 Platen spring not mounted in place
8 Jam clear cover damaged, broken
9 Platen ASSY damaged, broken
10 Registration sensor defective
11 Paper tray defective
12 Main PCB defective
Cause
Set the bank ASSY into place.
Replace the main PCB.
Cause
Remove foreign materials.
Set the bank ASSY into place.
Set the platen foam into place.
not mounted Set the j
Set the CR guide rail into place.
Set the platen ASSY into place.
Set the platen spring into place.
Replace the jam clear cover.
Replace the platen ASSY.
Replace the registration sensor PCB ASSY.
Replace the paper tray ASSY.
Replace the main PCB.
2-61
Solution
Solution
am clear cover into place.
Confidential