Traffic Information - Kenwood KVT-925DVD Instruction Manual

Tuner Control
Direct Search
Tunes in a station when its frequency is
entered.
1 Select a band
2 Selects the Direct Search mode
DIRECT
Enter a frequency
3
—
When you enter them, signal reception starts.
Example: When you receive FM 92.1 MHz
Example: When you receive AM 810 kHz
The operation ends automatically if you do not
operate within 10 seconds.
30 English

Traffic Information

When a traffic bulletin starts, any source is
switched to the traffic information and it is
displayed automatically.
When the traffic bulletin starts...
The Traffic Information screen appears automatically.
Traffic Information screen
1
2
3
SRC
4
1
1 Adjusts the volume.
2 Calls the Sound Effects Menu. (see page 76)
3 Switches the source.
4 Calls the Setup Menu. (see page 49)
Preset of traffic information volume
1 Tune in a station
Adjust the volume
2
3 Preset the volume
Continue to touch the key until the volume is
displayed.
The preset volume is used automatically when the
traffic bulletin starts in the next time.
Search for Program Type
A program is tuned when you set its program
type.
1 Call the Tuner Menu
MENU
2 Call the PTY Search Menu
1
PTY Search
1
2
n
2
1 Selects a program type.
2 Scrolls the program type list.
3 Searches for the program type.
It is displayed when the Program Type is selected.
4 Returns to the Tuner Menu.
3 Select a program type
News
4 Search for the program type
SRCH
Radio Text
You can display the radio text.
1 Call the Tuner Menu
MENU
2 Display the Radio Text
Radio-Text
3
1
3
SRCH
2
2
4
RTN
1 Displays the Radio Text.
2 Scrolls the Radio Text.
It is displayed when information cannot be
displayed on a single screen page.
3 Returns to the Tuner Menu.
etc.
1
English 31