Audio Set Up; Displaying The Car Type Set Up Screen; Displaying The Speaker Set Up Screen; Displaying The Channel Level Screen - Kenwood KVT-925DVD Instruction Manual

Setup Menu

Audio Set Up

You can set up the car type and speaker system you use together with this unit.
Displaying the Car Type Set Up
screen
If your vehicle type is selected, the Digital Time
Alignment is set automatically (for timing adjustment of
sound output for each channel) to have the highest
surround effects.
Audio Set Up
Car Type Set Up screen
MENU
DTA
Preset
4
7
1
3
2
5
5
1
50 English
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Sound Effects Menu. (see page 76)
4 Calls the Setup Menu.
5 Sets up the car type you use together with this unit.
6 Displays the DTA (Digital Time Alignment) Setup
screen. (see page 54)
You can adjust the digital time alignment that was
set automatically when you selected the car type.
6
1
7 Call the DTA screen setup from memory.
8 Displays the Speaker Set Up screen.
If is not shown, touch
Audio Set Up
or to display it.
Next
1
8
Displaying the Speaker Set Up
screen
When the speaker type and size are set, the speaker
crossover network and equalizer curve are set
automatically.
Speaker Set Up screen
9
Prev.
15
Displaying the Channel Level
screen
You can set the volume at each setup position.
Channel Level screen
19
9 Selects a speaker to be set.
(see <Speaker Set Up>, page 52)
p Selects a speaker type.
(see <Speaker Set Up>, page 52)
q Stores your setup in memory.
(see <Speaker Setup Memory>, page 55)
w Displays the Speaker Crossover Setup screen.
(See <Crossover Network Setup>, page 55)
You can adjust the crossover setup that was set
automatically when you selected the speaker type.
11 12
e Set the use or no use of tweeter.
(see <Speaker Set Up>, page 52)
r Displays the Channel Level Setup screen.
t Displays the Car Type Set Up screen.
10 10
13
Use
14
y Selects a speaker to be set.
(see <Channel Level>, page 53)
u Sets the speaker volume.
(see <Channel Level>, page 53)
i Starts or stops test signal tone output for setup
check.
o Displays the Speaker Set Up screen.
18
16
Your setup on the <Sound Effects Menu> is
adjusted automatically to get the best sound
effects according to the car type and speaker you
+1 +10 dB have set on the <Audio Set Up> (see page 50). We
17 17
recommend you to complete the <Audio Set Up>
first, then set up the <Sound Effects Menu>.
You can fine-adjust the automatic set value by
<DTA Setup> (see page 54), <Crossover Network
Setup> (see page 55), or <Parametric Equalizer>
(see page 81).
English 51