Restricting Rds Region (Region Restrict Function); Traffic Information Function - Kenwood KDC-6060R Instruction Manual

Rest rict ing RD S Region (Region Rest rict Funct ion)
You can choose w hether or not to restrict the RDS channels,
received w ith the AF function for a particular netw ork, to a
specific region. When the Region Restrict Function is on, the
region is restricted and the REG indicator is turned on.
Turning Region Restrict Function On/ Off:
1
Hold dow n the M ENU button for one second or more.
"M ENU" is displayed and the menu mode is turned on.
2
Press the ¢ button repeatedly until the Region restrict
function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "REG ON" or "REG OFF" in
the display, indicating that the function is on or off,
respectively.
3
Sw itching settings
Press either the AM button or FM button.
The display and setting w ill change.
4
Press the M ENU button to end the menu mode.
N OTE
Sometimes stations in the same netw ork broadcast different
programmes or use different programme service names.
Traf f ic Inf orm at ion Funct ion
You can listen to traffic information. If you are listening to
tapes or discs, they w ill continue playing until a traffic bulletin
is broadcast.
Turning TI function On/ Off:
Press the TI button to turn the function on and off.
When the function is on, the TI indicator is turned on.
When a traffic information station is being received, the TP
indicator w ill turn on. When none is being received, the TI
indicator w ill blink on and off.
When a traffic bulletin begins to be broadcast, the TA indicator
w ill turn on, and reception w ill begin at the preset volume.
If you are listening to a tape or disc w hen a traffic bulletin
begins, they w ill automatically be turned off. When the bulletin
ends or poor reception is experienced, the tape or disc w ill
begin playing again.
N OTE
Pressing the TI button w hilst in the M W/LW band automatically
sw itches reception to the FM band. How ever, the M W/LW band is
not returned to w hen the TI button is pressed again.
Sw itching to a Different Traffic Information Station:
Use the 4 / ¢ buttons to make an auto seek of the TI
stations in a certain band.
N OTE
• When you are listening to a tape or disc, you cannot change to
another TI station.
• When the auto TP seek function is turned on and reception
starts to w eaken, the tuner automatically seeks stations w ith
better reception.
• If you are tuned to a station that is not a traffic information
station itself but w hich provides EON services, you can still have
traffic information received.
• Holding the TI button dow n for one second or more w hen the TI
function is on in the disc control mode results in a change to the
frequency display of the traffic information station for five
seconds.
— 17 —