Editing The Phone Book; Quick Dialing; Hands Free Setup - Kenwood KVT-925DVD Instruction Manual

Hands-Free Unit Control

Editing the Phone Book

You can edit data you have registered in the
Phone Book.
1 Select an item you wish to edit
Kenwood
See the <Calling by Phone Book> (see page 88) and
select an item you wish to edit on the Phone Book
List screen.
Kenwood
Kenwood
2 Start editing
Edit
The Edit Phone Number screen appears.
Edit Phone Number ("TEL Number Edit") screen
TEL Num
1
4 6
7 9
0 #
*
+
+ Clear
2
1 Enters a phone number.
2 Clears the input phone number.
All entry number are cleared if this key is touched
more than 1 second.
3 Returns to the Phone Book List screen.
4 Enters the phone number.
3 Enter a phone number
0 9
−
90 English
4 Register the phone number
OK
The phone number is registered, the Edit Name
("Name Edit") screen appears.
Edit Name ("Name Edit") screen
1
Aa
3
Type
AUTO
2
Space
4
S T U V W
Edit
Y Z , . !
Clear
4
OK
1 Shifts the cursor.
2 Enters a space.
Return
3 Switches the character type.
The digits, accent and extended code characters,
and alphabets are switched each time it is
pressed.
4 Scrolls the keyboard display.
5 Enters a character.
6 Clears the character.
All entry characters are cleared if this key is
touched more than 1 second.
7 Enters the entry characters.
8 Returns to the Edit Phone Number ("TEL Number
Edit") screen.
AUTO
The extended code characters are displayed only
4
when a cellular phone supporting the GSM
OK
alphabets is connected.
Each of extended code characters (^, {, }, \, [, ], ¯,
|, €) occupies a two-character memory space
when registered.
3
Enter a name
Return 5
A
etc.
6 Register the phone number
OK
The editing completes and the Phone Book data is
updated.

Quick Dialing

You can register up to 3 phone numbers for
quick dialing.
To register a phone number:
1 Display a phone number you wish to register
See the <Calling by Phone Book> (see page 88) and
<When dialing> (see page 87).
O
1
2 Register the phone number
5
6
Clear
7
OK
X
Continue to touch more than 2 seconds.
8
?
Return
To call a phone number from memory:
Only a phone number can be registered for
Quick Dialing. Therefore, the destination
subscriber name and others are not displayed
during dialing.

Hands Free Setup

The hands-free system can be set as follows.
Display the SMS SetUp screen
Hands Free Set Up screen
Hands Free Set Up
P 1
— P 3
P 1 P 3 1 Sets an automatic response time after call
—
termination.
2 Adjusts the microphone sensitivity.
3 Sets a ringing tone output position.
"FL": Outputs the tone from the front left-hand
"FR": Outputs the tone from the front right-hand
4 Synchronizes the GSM with the Phone Book of
optional KCA-HF521 unit.
5 Synchronizes the GSM with the SMS of optional
KCA-HF521 unit.
6 Returns to the GSM Control screen.
The "Phone Voice" of both "FL" and "FR" can be
turned On at the same time. But they cannot be
turned Off at the same time.
SetUp
AUTO
Auto Response Time
1 30 sec 1
MIC Sense
2 31 2
Phone Voice
FL FR
3
3
Book SMS
Sync Sync
4 5
6
Return
side speaker.
side speaker.
English 91