Toshiba MMU-UP0091HP-E Service Manual page 174

No. Part name
2. Attachment
7 Fan motor
(Continued)
2) Fix the fan motor lead, TC sensor and TCJ
3) Mount the electric parts box with the fixing
4) Connect the connector removed in item 1
5) Following to work of item 2 of 2 , mount
When exchanging the fan motors of the
models MMU-AP009 to AP030, take off
lead wire from the clamp filter, which is
connected to CN334 of the fan motor to be
exchanged and then connect the removed
lead wire to a new fan motor.
Procedure
sensor with the clamp of the bell mouth.
screws A and B.
(Ø4 × 10, 3 pcs. Ø4 × 10, 1 pc.)
as before and then fix wiring with the
clamp.
the electric parts box cover and the suction
grille as before.
XCAUTIONX
Fixing screws (Ø4 × 8)
- 174 -
Remarks
M6 nut
Fan motor Fan motor
Motor lead Motor lead
holding bracket holding bracket
Clamp
Fan motor lead