Setting The Channel Tuning Mode; Tuning To The Next Programmed Channel; Tuning To A Specific Channel (Programmed Or Unprogrammed); Channel Return - Toshiba Regza 42ZV650U Owner's Manual

Setting the Channel Tuning Mode

This feature allows you to choose how tuning will be
handled for analog and digital channels when the
TV is in Antenna mode.
Note: To use this feature, the ANT/CABLE In must be set
to Antenna (- page 37).
The channel tuning mode has three options.
Mode Description
Both analog and digital channels can be
Standard
tuned normally
Digital channels will have priority
when manually entering a channel
Auto number using the Channel Number (0-
(default) 9) on the remote control, analog
channels can still be tuned by < / , if
available
Digital Only digital channels can be tuned
To set the Channel Tuning Mode:
1
From the SETUP menu, highlight TV Settings
and press T.
2
Press B or b to highlight Channel Tuning
Mode.
3
Press C or c to select your desired mode and then
press O.
Note: The Channel Options window as well as the
Channel Browser ANT/CABLE List will be updated
automatically when you change the mode. Also, the
History List will be cleared, but the Favorites List will be
saved.
Tuning to the next programmed
channel
To tune to the next programmed channel:
Press < or , on the remote control or TV control
panel.
Note:This feature will not work unless you program
channels into the TV's channel memory (- page 37).
44
Chapter 6: Using the TV's features
Tuning to a specific channel
(programmed or unprogrammed)
Tuning analog channels:
Press the Channel Number (0–9) on the remote
control. For example, to select channel 125, press 1, 2,
5, then T.
Tuning digital channels:
Enter the major Channel Number (0–9) on the
remote control, followed by the dash (=) button
and then the sub-channel number. For example, to
select digital channel 125-1, press 1, 2, 5, –, 1, then T.
Switching between two channels
using Channel Return
The Channel Return feature allows you to switch
between two channels without entering an actual
channel number each time.
1
Select the first channel you want to view.
2
Select a second channel using the Channel
Number buttons (and the dash (=) button if
needed).
Press R on the remote control. The previous
3
channel will display. Each time you press R,
the TV will switch back and forth between the
last two channels that were tuned.
Note: If you press
TV will return to the last-viewed input.
R
from a non-antenna input, the