Contents ® Stable Sound ..........26 Introduction Surround Sound ..........26 Welcome to Toshiba ..........4 Bass Boost ............26 Important Safety Instructions ........4 SPDIF Type ............26 Installation ............4 PC/HDMI 1 Audio ..........26 Use ..............6 HDMI Audio ............
Page 3
Troubleshooting ............44 Symptom and solution ........44 Specifications ............45 Information License Information for software used with Toshiba Televisions .............. 46 Appendix A – MPEG Audio ........47 Appendix B – JPEG decoder ........47 Appendix C – PNG decoder ........48...
Welcome to Toshiba the cabinet. • Never place the TV so that it is facing upward or • Thank you for purchasing this Toshiba LCD Colour on its side. television. This manual will help you use the exciting • Never place the TV in a closet, bookcase or other features of your new TV.
Page 5
When carrying the TV, at least two people are needed. Be sure to carry it upright. Never carry the TV with the screen facing up or 32AV800AZ | 40LV800AZ down. 10 cm Sturdy tie min.
Introduction When the TV will not be used for a long period of time, such as during vacation or travel, remove Never place hot objects or open flame sources, the power plug from the wall outlet for safety. • The TV is not completely disconnected from the such as lighted candles or nightlights, on or close to the TV.
Introduction Service Cleaning Never repair, modify or disassemble the TV by yourself. Remove the power plug before cleaning. It may cause a fire or an electric shock. Consult a Never use solvents such as benzine or thinner to service technician for inspection and repairs. clean the TV.
Introduction Exemptions Important information • Toshiba is not liable for any damage caused by fires, natural disaster (such as thunder, earthquake, etc.), If a television is not positioned in a sufficiently stable acts by third parties, accidents, owner's misuse, or location, it can be potentially hazardous due to falling.
You can operate your TV using the buttons on the TV control panel or the remote control. The back and side of the page 37 Connecting your TV) panel provide the terminal connections to connect other equipment to your TV. ( 32AV800AZ | 40LV800AZ L / R Power...
Page 11
Getting started Point your remote control at this Press to turn the TV on or area when selecting programme standby. Power position or adjusting the volume IR Sensor level, etc. Program position: When no menu is on-screen, these buttons Green LED: On Timer/EPG Timer select the programme position.
Getting started TV back panel connections Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. 32AV800AZ | 40LV800AZ AC IN 32EL800AZ | 42HL800AZ AC IN...
Page 13
Getting started HDMI input terminals — High-Definition Multimedia Interface input receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI device. page 40 Connecting an HDMI or a DVI device) PC input terminal — For use when connecting a personal computer (PC).
Getting started Learning about the remote control Location of controls Simple at-a-glance reference of your remote control. For On/Standby mode To select input from external sources Still Picture To call up Teletext services To turn the subtitle On/Off Stereo/Bilingual transmissions Number buttons To return to the previous programme To toggle between ATV and DTV mode...
Getting started Learning about the menu system PREFERENCES menu We suggest you familiarize yourself with the display PREFERENCES REGZA−LINK Setup charts before using the menu system: Teletext Auto Panel lock Auto format 4:3 stretch • Press to display menu, then press ◄ or ► to Blue screen RETURN PICTURE...
Getting started 4. To start channel scan, use ▲ or ▼ to select Start Turning on the TV Scan and press Auto Tuning Switching on the TV Progress (%) Found Connect the power cord to a wall outlet, the power indicator lights in red (standby mode).
Getting started Setting the programmes Manual Tuning Note: When the Channel Block is activated, a 4-digit password is needed to enter the Channel Option ATV Manual Tuning submenu under DTV Settings menu. Search the new channels that are not in the programme list.
Getting started 2. Press ◄ or ► to adjust your preference. to display the breakdown menu. Press ◄ 5. Press or ► to select an item, then press ▲ or ▼ to select DTV Manual Tuning the item as shown below. Signal Strength Quality POOR...
Getting started 3. Press ▲ or ▼ select the desired channel and then 4. Change the Position by using the number buttons 0~9. press . A tick icon appears. Channels Channels Position Name Position Name − − − TEN Digital ONE HD ELEVEN SBS HD...
Getting started 2. Select Yes to confirm, or select No to exit. Lock Watched Channel Reset TV This function is to setup the Lock for currently watched Previous setting will be lost! channel. Press Exit for no change. 1. Select DTV Setting from the SETUP menu. 2.
Getting started Stereo… Press to select Stereo or Mono. Information Bilingual… Bilingual transmissions are rare. If they The on-screen information will give the details of the are transmitted the word Dual will display. Choose channel programme currently being viewed. the required programme number and if the word Dual appears press to select Dual 1 or Dual 2.
Using the TV's features (General) Using the TV’s features (General) Picture Control Widescreen viewing Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due Wide to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen.
Page 23
Using the TV’s features (General) Press QUICK to display the Quick Access menu and use ▲ or ▼ to select the Quick access press ◄ or ► to select the option Picture Size Wide Picture Size and Sleep Timer 0 Minutes Media Player REGZA−LINK You can choose the picture size from Wide, 4:3, Super Live, Cinema, Subtitle, 14:9, Native, Normal, or Dot by Dot.
Using the TV’s features (General) Still Picture Backlight • Press to freeze the picture. Adjusting the Backlight can improve the clarity of the Even if an image is frozen on the TV screen, the pictures screen when viewing. are running on the input source. Audio continues to be 1.
Using the TV’s features (General) Static Gamma MPEG NR The Static Gamma feature allows you to adjust the If the receiving signal of MPEG is a grained noise levels of black in the picture. depending on the compression and conversion, the noise may be reduced when using this function.
Using the TV’s features (General) 1. In the SOUND menu, press ▲ or ▼ to highlight Dual Bass Boost. If a programme or film is being broadcast with 2. Use ◄ or ► to change the setting. a soundtrack in more than one language, the DUAL feature allows selection between them.
Using the TV’s features (General) 1. In the AV connection menu, press ▲ or ▼ to select Selecting the stereo programmes Lip Sync. 1. When a stereo programme is received, Stereo 2. Press ◄ or ► to select On or Off. appears.
1080p high definition signals. On Timer Sleep Timer 0 Minutes REGZA-LINK Controls This feature uses CEC (Consumer Electronics Control) technology, and allows the control of Toshiba REGZA- LINK compatible equipment from the television’s remote Edit Back RETURN control.
Using the TV’s features (General) 1. Press ▲ or ▼ to select REGZA-LINK in the Quick The available functions are dependent on the equipment connected. Not all the remote control keys may be Access Menu, and then press . The control panel available.
Using the TV’s features (General) Ensure that the connected AV amplifier and REGZA- Auto Standby LINK equipment are selected in the input source When the Auto Standby is enabled, switching off the selection and that the Speaker Preference is set to Amplifier in the REGZA-LINK Setup menu.
Using the TV’s features (General) 2. Press ▲, ▼, ◄, or ► to select a folder then press 1. To open Media Player, highlight the Media Player in the APPLICATIONS menu and press . All the images in the folder will appear in the Multi View grid.
Using the TV’s features (General) 2. Press ◄, or ► will display next or previous images. 2. Press ▲ or ▼ to select a folder then press . All The images can also be rotated by pressing ▲ or the music files in the folder will appear in the Multi ▼.
Using the TV’s features (General) 3. Press MENU to change the settings when playing Viewing Video Files video. This view mode allows all the video files within a selected folder to be viewed simultaneously, using thumbnail views in a grid. The initial highlighted position will be the top left image within the grid.
Using the TV’s features (General) 1. In the PREFERENCES menu, press ▼ to highlight 1. In the Subtitle and Audio menu, press ▼ to Auto format. highlight Primary Audio Language or Secondary Audio Language. 2. Use ◄ or ► to select On or Off. 2.
Using the TV’s features (General) Change Password Programme Guide Change and set the 4-digit password. The programme guide gives access to programme 1. Press ▲ or ▼ to select Pin Setting in the DTV details for all available channels. Setting menu, and press to enter.
Using the TV’s features (General) 2. Press ▲ or ▼ to select the desired channel. Press Teletext ► to select programme schedule, and then press to enter the Programme Timer. This television has a multi-page text memory, which Basic Form Programme Guide takes a few moments to load.
• DO NOT connect the DIGITAL AUDIO output TV back view terminal to the AC-3 RF input of a Dolby Digital 32AV800AZ | 40LV800AZ Receiver with a built-in Dolby Digital decoder. • Connect the DIGITAL AUDIO output terminal to the Coaxial input of a Receiver or Processor.
Connecting your TV Connecting an amplifier equipped Connecting an amplifier equipped with a Dolby Digital decoder with an MPEG decoder 32AV800AZ | 40LV800AZ 32AV800AZ | 40LV800AZ Amplifier equipped with Amplifier equipped with Dolby Digital decoder MPEG decoder To Coaxial Type...
Connecting your TV Connecting an amplifier equipped Side Connections with a digital audio (coaxial) input Connection example: 32AV800AZ | 40LV800AZ 32EL800AZ 32AV800AZ 42HL800AZ 40LV800AZ TV side view Amplifier equipped with digital audio input decoder DVD video player (with composite video outputs)
Connecting your TV Connecting an HDMI device Connecting an HDMI or a DVI One HDMI cable (type A connector) device TV back view • When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device. •...
HDMI standard. This feature is Connection example: limited to models incorporating Toshiba’s REGZA- LINK. However,Toshiba is not liable for those 32AV800AZ | 40LV800AZ operations. Refer to individual instruction manuals for compatibility information. The back of your television AV amplifier...
Connecting your TV Signal names for mini D-sub 15 pin connector Connecting a computer Pin assignment for RGB/PC terminal An analogue RGB (15 pin) computer cable can be connected. TV back view Pin No. Signal name Pin No. Signal name VGA-5V Computer Mini D-sub...
Connecting your TV Connecting your TV Acceptable Video signals through HDMI terminals Resolution H. Frequency (KHz) V. Frequency (Hz) 480i 15.734 60.000 480p 31.500 60.000 576i 15.625 50.000 576p 31.250 50.000 720p 37.500 50.000 720p 45.000 60.000 1080i 28.125 50.000 1080i 33.750 60.000...
Reference section Reference section Why don’t the devices connected via HDMI operate Troubleshooting properly? • Make sure to use cables with the HDMI logo Before calling a service technician, please check the ). Some early HDMI equipment may not following table for a possible cause of the symptom and work properly with the latest HDMI TV products, some solutions.
TOSHIBA. These software and accompanied documents are copyrighted by TOSHIBA, and protected by Copyright Act, an international treaty's articles and other governing laws. The software components which are made or developed originally by TOSHIBA and not subject to EULAs are not a target of source code offering.
Information Note Appendix A – MPEG Audio Header part: libmpg123: MPEG Audio Decoder library This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.
Information Note It appears that the arithmetic coding option of the JPEG spec is covered by patents owned by IBM, AT&T, and Mitsubishi. Hence arithmetic coding cannot legally be used without obtaining one or more licenses. For this reason, support for arithmetic coding has been removed from the free JPEG software. (Since arithmetic coding provides only a marginal gain over the unpatented Huffman mode, it is unlikely that very many implementations will support it.) So far as we are aware, there are no patent restrictions on the remaining code.
Information Note Appendix D – Zlib Header part: Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler This software is provided ‘as-is’, without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1.