Selecting The Optical Audio Output Format; Using The Dolby Digital Dynamic Range Control Feature; Using Dolby ® Volume; Setting The Pin Code - Toshiba Regza 42ZV650U Owner's Manual

Selecting the optical audio output
format
You can use this feature to select the optical audio
output format when you connect a Dolby Digital
decoder or other digital audio system to the
DI ITAL AUDIO OUT terminal on the TV.
1
Tune to a digital source on the ANT/CABLE
input.
2
From the SETUP menu, highlight AV
Connection and press T.
3
Press B or b to select Digital Audio Output.
4
Press C or c to select Auto or PCM , then press
O.
Auto: this mode outputs Dolby Digital or PCM to
the digital audio output socket providing it is
being broadcast.
PCM: this mode outputs PCM format to the
digital audio output socket.
Note: Auto mode outputs PCM only while playing DivX
files.
Using the Dolby
®
Range Control feature
This dynamic range control feature causes the ATSC
dynamic range to be further compressed, allowing
you to switch from digital to analog broadcasts at the
same dynamic range.
1
From the SOUND menu, highlight Dynamic
Range Control.
2
Press C or c to select On.
Note:
• This feature is only available on Digital Channels.
• This feature is not available when Dolby Volume is set to
Low or High.
• This feature will function in relation to the Optical Output
Format (PCM mode).
Using Dolby Volume
®
This feature provides a consistent sound volume
regardless of programs, channels or input sources.
1
From the SOUND menu, highlight the Dolby
Volume.
2
Press C or c to select Low, High or Off.
Note:
• If Dynamic Range Control is set to On, this feature will be
grayed out.
• This feature is not effective for the audio signal output
from DIGITAL AUDIO OUT and FIXED AUDIO terminal.
Chapter 6: Using the TV's features
Digital Dynamic

Setting the PIN code

A PIN code is necessary for some menus.

Registering a new PIN code

1
From the PREFERENCES menu, highlight PIN
Setting and press T. A new screen will display.
2
Press number buttons to enter a four-digit number.
Reenter the PIN code to confirm it.
PIN ettin
New PIN
Confirm PIN code

Changing or deleting your PIN code

1
From the PREFERENCES menu, highlight PIN
Setting and press T. A new screen will display.
2
Press number buttons to enter your four-digit
PIN code.
PIN ettin
Enter PIN
Change PIN
•
Highlight Change PIN and press T.
Delete PIN
•
Highlight Delete PIN and press T.
If you delete the PIN code, the settings of
Parental Control and Locks are reset.

If you cannot remember your PIN code

While the PIN code entering screen is displayed,
press E four times within five seconds. The PIN
code will be cleared and you can enter a new PIN
code.
53