Tuning channels
Setting the Channel Tuning Mode
You can select how tuning is handled for analog and
digital channels when the TV is in Antenna mode.
Note: To use this feature, ANT/CABLE In must be set to
Antenna (- p. 28).
1
> Settings > SETUP > TV Settings >
2
Press B or b to highlight Channel Tuning Mode.
Mode
Standard
Auto
(default)
Digital
3
Press C or c to select a mode. Press
Note: The Channel Options screen and the Channel
Browser ANT/CABLE List are updated when you change
the mode. The History List is cleared, but the Favorites List
is saved.
Tuning in to the next programmed
channel
Press
or
CH
on the remote control or TV control
CH
panel.
Note: This feature does not work unless you store
channels in the TV's channel memory (- p. 28).
Tuning in to a specific channel
(programmed or unprogrammed)
Channel
Analog
Digital
32
Downloaded from
www.Manualslib.com
Chapter 6: Basic features
Description
You can tune both analog and digital
channels normally.
Digital channels have priority when
manually entering a channel number
using the 0-9 buttons on the remote. To
tune analog channels, use
available.
You can only tune digital channels.
Description
Use the 0–9 buttons on the remote
control. (For example, to select
channel 125, press 1, 2, 5.) Press
Use the 0–9 buttons on the remote
control to enter the major channel
number. Press the dash (
Enter the sub-channel number. (For
example, to select digital channel 125-
1, press 1, 2, 5, –, 1.) Press
manuals search engine
Using the Channel Browser
The Channel Browser
interface for all of your channels and inputs.
Features:
•Navigate the contents of all of your inputs.
•Keep a list of your favorite channels.
•Keep a history of the last 32 channels or inputs
viewed.
•Quickly surf and tune to your recently viewed
channels/inputs from the Channel Browser
List.
.
OK
•Surf via Browse mode (to immediately tune to
channels as you highlight them in the
Channel Browser
in the Channel Browser
to).
•Quickly change inputs from the Inputs List.
•Quickly select HDMI
CEC List.
CH
/
if
To set up the Channel Browser
CH
1
Browser Setup >
2
Press b or B to highlight Navigation.
.
3
Press C or c to select Select Mode or Browse
Mode.
4
Select a list.
•
History List
ANT/CABLE List
•
Inputs List
•
Favorites List
•
•
HDMI-CEC List
Note:
• The History List will be cleared every time the TV is
powered off.
• The HDMI-CEC List is not available when Enable
HDMI-CEC Control is set to Off (- p. 39).
5
Select On or Off.
6
To return to factory defaults, highlight Reset and
press
To open the Channel Browser
•
> APPLICATIONS > Channel Browser >
•Press
.
OK
) button.
-
.
O K
™
is a helpful navigational
™
) or Select mode (to surf channels
™
before you select one to tune
®
CEC devices from the HDMI-
™
:
> Settings > PREFERENCES > Channel
.
O K
.
O K
™
:
or
.
™
™
History
.
OK