Figure 4-24 Connection Between Display Control Pcb (Sw1) And Remoteye; Module - Toshiba G9000 Series Installation And Operation Manual

The Power Supply PCB (PSAU-60, designated as PS1) and the Cable1 (designated as 3BBA0083P001) are equipped
with G9000 UPS units.
The Cable2 (D-sub 9pin) and the Cable3 (12V power cable) are included in the RemotEye 4 package.
The Power Supply PCB (PS1) provides connectivity between the Display Control PCB (DPAU-81, designated as SW1)
and the RemotEye 4 module in G9000 UPS units.
The RemotEye II communicates with the UPS via a Cable2. The connection is described in Figure 4-24 below.
CAUTION
Cable3
12V Power Cable

Figure 4-24 Connection between Display Control PCB (SW1) and RemotEye

G9000 Series UPS 300-750kVA Installation and Operation Manual – 61480-017
The UPS has to be de-energized when the RemotEye 4 module is installed for safety
reason.
DPAU-81
SW1
PSAU-60
PS1
RemotEye
(Receptacle)
(RJ45)
Cable1
3BBA0083P001
(male)
Cable2
D-sub 9-pin Cable
(RJ45)
(RJ45)
®

Module

39