The Power Supply PCB (PSAU-60, designated as PS1) and the Cable1 (designated as
3BBA0083P001) are equipped with G9000 UPS units.
The Cable2 (D-sub 9pin) and the Cable3 (12V power cable) are included in the RemotEyeII
package.
The Power Supply PCB (PS1) provides connectivity between the Display Control PCB
(DPAU-81, designated as SW1) and the RemotEyeII module in G9000 UPS units.
The RemotEye II communicates with the UPS via a Cable2. The connection is described in
FIGURE 2.14 below.
CAUTION
FIGURE 2.14 Connection between Display Control PCB (SW1) and RemotEyeII module
Cable3
12V Power Cable
34
The UPS has to be de-energized when the RemotEyeII module is installed for
safety reason.
DPAU-81
SW
1
PSAU-60
P
S1
(receptacle)
RemotEyeII
(RJ45)
Cable1
3BBA0083P001
(male)
Cable2
D-sub 9-pin Cable
(RJ45)
(RJ45)
G9000 Installation and Operation Manual