Operator Controls And Indicators; Led Display; Figure 4-1 Operation/Display Panel (Front Panel) - Toshiba G9000 Series Installation And Operation Manual

4

OPERATOR CONTROLS AND INDICATORS

The G9000 Series operator controls and indicators are located as follows (Door exterior):
8
3
2
1
7
4.1

LED DISPLAY

1) Load on inverter [ LOAD ON INVERTER ] (green)
Illuminates when power is supplied from inverter to the critical load.
(Indicates the state of inverter transfer switch "52C".)
2) Battery operation [ BATTERY OP. ] (yellow)
Illuminates when power is supplied from batteries following a power failure.
3) Load on bypass [ LOAD ON BYPASS ] (yellow)
Illuminates when power is supplied to load devices by static bypass.
(Indicates the state of bypass transfer switch "52S".)
4) Overload [ OVERLOAD ] (yellow)
Illuminates in overload condition.
5) LCD fault [ LCD FAULT ] (red)
Illuminates when LCD is not responding.
G9000 Series UPS 300-750kVA Installation and Operation Manual – 61480-017

Figure 4-1 Operation/Display Panel (Front panel)

4
5
6
25