Benq Launcher - BenQ EX600 Manual

BenQ Launcher

BenQ Launcher is the projector's operating system that allows you to wirelessly cast your device's
screen, play files, run apps, as well as adjust projector settings.
Use the buttons on the projector, the remote control, or connect a USB mouse to the projector's USB-1 or USB-2
ports to navigate BenQ Launcher and operate its functions.
The BenQ Launcher home screen
Upon initial start up or when BenQ Launcher is selected in the input source menu, the projector will
display BenQ Launcher. If the projector is projecting from an input source (e.g. HDMI or
PC/YPbPr), you can return to BenQ Launcher mode by pressing the source button
LAUNCHER button on the remote control and then selecting BenQ Launcher in the input source
menu.
When the Auto Source function is enabled in the Advanced > Settings menu of the projector's OSD menu, the
projector will display the BenQ Launcher home screen by default every time it is powered on. If the Auto
Source function is disabled, the projector will detect if a signal is available from the input source that was last used
and switch to that input source if it is available, if a signal is not available or the projector was set to BenQ
Launcher during the previous session, the projector will enter the BenQ Launcher home screen. See
on page 91.
1
2
3
4
5
Actual screen may vary based on your BenQ Launcher firmware version.
The BenQ Launcher home screen features six main components:
No. Component
1 Status Bar
2 Main Menu
3 Sidebar
Icons that display the time, Bluetooth, wireless status, and device name.
Shortcuts to recently used apps/documents, instructions on how to project
wirelessly, and recommended features/functions. See
on page 37 for more information regarding the Main Menu.
A menu of quick navigation buttons. See
more information regarding the sidebar buttons.
Description
Using the sidebar on page 40
Brug (med kilden Launcher)
or the
Indstillinger
3
6
Using the Main Menu
for
35