BenQ EX600 Manual page 143

1. Choose one of the following options:
• Connect your smartphone to the same wireless network as your projector.
• Enable wireless hotspot for your projector and then connect your smartphone to the projector's
wireless hotspot. For instructions on how to enable wireless hotspot for your projector see
Hotspot on page
You must be connected to either the same wireless network as the projector or the projector's wireless hotspot for
BenQ Smart Control to work correctly.
2. Open the BenQ Smart Control app
3. Select the projector from the BenQ Smart Control device list.
The default name for the projector is "BenQ E600-xxxx" where the final four digits are the last four digits of its MAC
Address.
4. Choose one of the following methods to use BenQ Smart Control:
• Tap DPad to use the pre-configured buttons in the app to control your projector.
132.
Appendix: Brug (under Launcher-kilde) for firmware version før v01.00.19.00
on your smartphone.
143