BenQ EX600 Manual page 56

5. Select Bluetooth and press OK to enable Bluetooth.
6. Activate Bluetooth-pairing mode on the speaker or headphones.
7. Select the speaker or headphones from the Device List in the Bluetooth setting menu and press
OK.
8. When the projector and speaker or headphones have successfully connected the device listing in
the Bluetooth setting menu will be labeled Connected, you can now output the audio from the
projector to the speaker or headphone.
Once you have successfully paired your projector with the Bluetooth speaker, pairing information will
be stored on both devices and a connection will automatically be made when Bluetooth is enabled on
both devices and both devices are within range of each other.
• If you replace the wireless dongle on your projector anytime after you have paired your projector with a
Bluetooth device you will need to re-pair your projector to the device in order to create a Bluetooth connection.
• The quality of the Bluetooth transmission may depend on the quality of the Bluetooth signal along with the
compatibility of the mobile device.
56 Brug (med kilden Launcher)