Table of Contents
Advertisement
Available languages
Available languages
Wireless Hotspot
In situations where the projector is out-of-range of a wireless network (for example while on a camping
trip), you can configure the projector to act as a wireless hotspot to create a closed network for
devices to connect directly to the projector via a wireless connection and to project files from their
local storage.
The projector will have no access to the Internet while in wireless hotspot mode.
To create a wireless hotspot:
1. Install the wireless dongle provide into the wireless dongle port (see
Installation af den trådløse
dongle on page
8).
2. Power on the projector (see
Start af projektoren on page
22).
3. On the home screen of the BenQ Launcher interface select the Settings button and press OK.
4. Select Hotspot and press OK.
50
Brug (med kilden Launcher)
Advertisement
Table of Contents
