5. (Optional) Select Hotspot Name and/or Hotspot Password and press OK to change the name
and/or password of the wireless hotspot.
You can only change the Hotspot Name and Hotspot Password when Hotspot is disabled.
6. Select Hotspot and press OK to enable wireless hotspot.
The projector will have no access to the Internet while in wireless hotspot mode.
7. Once wireless hotspot is enabled, use the name shown in the Hotspot Name field as the SSID to
connect to from your mobile device's wireless menu and use the password shown in the Hotspot
Password field as the connection password.
Brug (med kilden Launcher)
51