BenQ EX600 Manual page 28

3. In the AMS Service screen press OK so that the AMS Service switch is set to On.
Once the AMS function is enabled on your projector you must bind your AMS administrator account to
the projector before you can utilize the AMS service.
Binding an AMS administrator account to your projector
Once you have enabled the AMS function the next step is to bind an AMS administrator account to
your projector so as to designate a specific administrator for your projector (i.e. to ensure that only
one administrator is authorized to manage the projector).
Before binding an administrator account to your projector, you must first ensure that the following conditions are
met for your projector:
• You have successfully registered for an AMS administrator account. See
more information on registering for an AMS administrator account.
• Your projector is connected to a wireless network with Internet access. See
wireless network on page 41
• AMS Service is enabled for your projector. See
AMS Service.
After enabling the AMS function a Log in as administrator window will pop-up. To bind an
administrator account to your projector:
Enter the Username and Password for your AMS administrator account in the Log in as
administrator window, select Login and press OK. If you do not want to bind an account to the
projector select Cancel and press OK.
Once you have submitted your administrator account's login information a message will appear
indicating that you have successfully bound your administrator account to the projector. To double
check whether the binding process is successful you can check the Device information menu in the
AMS service account menu, see
28 Brug (med kilden Launcher)
for more information on connecting to a wireless network.
Enabling AMS on page 27
The Account Menu on page 31
Before you get started on page 26
Connecting the projector to a
for more information on enabling
for more information.
for